Rosewill RPLC-200KIT Manuel d'utilisateur télécharger pdf (Page 22)

200Mbps Powerline Fast Ethernet Adapter KIT - RPLC-200KIT- User’s Manual

-22-

4.2 Using the Utility

Scenario:

Devices A and B are located in Network N. Device C (the joiner) that is located

in another network attempts to join Network N. See

Do as follows to add Device C to Network N using the Utility:

1. Connect Device C to the network card of a PC.

2. Open the Utility. The Main tab page displays information about Device C

after connection succeeds.

3. Click the Privacy tab page. Enter a name in the Private Network Name

field.

4. Click Set Local Device Only. When the page shown as below displayed,

the setting success. Now Device C has been removed from its logical

network.

5. Press the pushbutton on Device A or B for less than 3 seconds, making it

the „adder‟.

6. Within 2 minutes, press the pushbutton on Device C (the „joiner‟) for less

than 3 seconds.

7. Wait for connection to complete.

The Power indicator on Device A (or Device B) and Device C will flash at 1

second intervals until the process succeeds or fails. It will illuminate steadily on

success. If an error occurs, the Power indicator on Device A (or Device B) and

Device C will flash unevenly for 2 minutes.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28 29

Pas de commentaire

Rosewill RPLC-200KIT Manuel d'utilisateur Page 22