Rosewill RC-223 Manuel d'utilisateur télécharger pdf (Page 9)

RAID5 SATA II – 3Gbps External Dual Ports PCI-Express Host (Raid 5, 0, 1,10 & JBOD) RC-223 User Manual

4. Select Number of hard drive. Press Enter.

5. Select RAID size. Press Enter.

6. Press Y to save your settings.

7. Press CTRL+E and then press Y to exit the setup.

8. Continue with conventional Fdisk and Format steps as if you are installing a conventional

hard drive.

9. Your RAID configuration is complete. Please proceed to software installation section.

4.2. Creating Mirrored Sets (RAID 1)

1. As the BIOS boots, Press CTRL+S or F4 to enter the raid bios utility.

2. Select Create RAID set. Press Enter.

3. Select RAID 1 then press Enter.

4. Select Auto configuration. Press Enter.

5. Press Y to save your settings.

6. Press CTRL+E and then press Y to exit the setup.

7. Continue with conventional Fdisk and Format steps as if you are installing a conventional

hard drive.

8.Your RAID configuration is complete. Please proceed to software installation section.

4.3. Creating JBOD Sets

1. As the BIOS boots, Press CTRL+S or F4 to enter the raid bios utility.

2. Select Create RAID set. Press Enter.

3. Select JBOD (Single) then press Enter.

4. Select JBOD Drives. Press Enter.

5. Select RAID size. Press Enter.

6. Press Y to save your settings.

4.4. Creating Spare Drive

1. As the BIOS boots, Press CTRL+S or F4 to enter the raid bios utility.

2. Select Create RAID set. Press Enter.

3. Select Spare Drive then press Enter.

4. Select Spare Drives. Press Enter.

5. Select RAID size. Press Enter.

6. Press Y to save your settings.

1 2 3 4 5 6 7 8 9 10 11 12

Pas de commentaire

Rosewill RC-223 Manuel d'utilisateur Page 9